Anti-Climb 358 Fence Panel Machine

  Description of Anti-Climb Fence Panel Machine   

anti-climb fence panel machine also called 358 panel machine, 358 fence machine, anti-climb fence mesh machine, 358 welded fence panel machine, is used to make fence mesh, reinforcing mesh, road mesh, explosion-proof wall, shelf, etc.

  Technical Data   

Model DP-FP-3200A
Wire diameter 2.5-6mm
Longitude wire space 76.2-300mm
Cross wire space Min.12.7mm
Mesh width/height Max.3.2m
Mesh length Max.6m
Welding speed 50-75 times/min
Welding electrodes 40pcs
Welding transformers 150kva*10pcs,
Wire feeding way Pre-straightened&pre-cut
Overall Size 12*3.7*2.3m
Weight 5300kg
anti-climb-fence
NOTE: When 2.5-5mm, Min.longitude wire space 50mm; when 5-6mm, Min.longitude wire space 100mm.

  Youtube Video   

Here you can know more about Anti-climb Fence Panel Machine.

  Machine Advantage  

  • Pneumatic electrodes, electrodes welding pressure are the same, finished mesh panel very flat.
  • Single connection technology for each pair of upper electrode and its lower electrode, only welding spots are conducted electricity, finished mesh panel very flat.
  • The pre-straighted& pre-cut line wires fed by new type “V” type slot tunnel, suitable for different diameter, finished line wire space more accurate than before.
  • The pre-straighted& pre-cut cross wires fed by hopper automatically, SMC (Japan) air cylinder control, more precise.
  • The electro-magnetism valve is SMC brand (Made in Japan). The quality is much better.
  • Panasonic (Japan) servo motor&planetary reducer for pulling mesh, more precise.
  • The cable carrier is Igus brand, imported from Germany, very good quality, not hung down.

  Finished Product   

anti-climb-fence

  Leave a Message